Frames & Housing

Carbon Sorb Housing

The Aerostar Carbon Sorb Housing is a multistage unit designed to remove particulate and gaseous contaminants. The housing will hold 2" or 4" pleated pre-filters and 3/4" refillable carbon trays

View More

HEPA Bag-In-Bag-Out

The Aerostar HEPA Seal Bag In/Bag Out Housing is a single or multistage unit designed to hold HEPA filters in 99.97% and 99.99% efficiency at 0.3-micro n size particles with either a gasket or fluid seal.

View More

HEPA Bolt-Seal Housing

Designed to hold HEPA filters and the optional pre-filter section is available to accommodate 2" or 4" pre-filters. Standard housing depth is 26-1/4". Custom designs are available to meet individual applications that have specific dimensional requirements. The Bolt-Seal Housing is commonly used in food processing, pharmaceutical, and biotechnology environments.

View More

HEPA Crank Seal

The Aerostar HEPA Crank-Seal Housing is a multistage unit designed to hold HEPA filters in 95%, 99.97% and 99.99% efficiency at 0.3-micron size particles with either a gasket or fluid seal.

View More

HEPA Seal Frame

The Aerostar HEPA Seal Frame is a holding frame that can be used to hold individual filters, or for multiple banks holding a 5 7/8" or 11 1/2" HEPA filter.

View More

InnerSealHousing

Inner seal housings are designed to hold multiple stages of filtration. Filter housings are rated to +/- 6”WG and 0.5” leakage at 125% of standard rated flow. Higher pressure designs are available for specific applications. Inner Seal Housings are the best fit in Gun Ranges, Health Care, and other general HVAC environments.

View More

Isolation Room Containment System

Isolation Room Containment System (IRCS) is a self-contained unit designed to meet the CDC’s guidelines by providing high-efficieny filtration for small contamination areas. The IRCS consists of two components, a BIBO housing and a dedicated fan unit on a channel base.

View More

Pad Holding Frame

The Aerostar® Pad Holding Frame is a holding frame this is used to hold media pads. The frame can be used for new installations or upgrades of existing systems. It is designed for changing dirty pads quickly, safely and efficiency.

View More

Seal Frame

The Aerostar® Seal Frame is a holding frame this is used to hold individual filters. The Seal Frame can be used for new installations or upgrades of existing systems.

View More

Seal V-Bank Housing

Aerostar Seal V-bank housing can replace any existing filter housing. It is designed for use with any 2" or 4" filter. This housing can be used in any application where there is a need for air filtration.

View More